Budi Dive
Inquire

Every piece of life-support gear leaves our bench calibrated and pressure-verified.

We maintain an inquiry-only inventory of technical scuba hardware at 803 North Tampa Street. We fit regulators, backplates, exposure suits, and cylinders to your exact physical frame and dive profile.

803 N Tampa St, Tampa FL NAUI Instructor Bench Since 2026 Intermediate Pressure Bench Tested +1 (291) 555-4852

Hardware Categories on the Workshop Line

Our scuba gear rental tampa facility inspects every manifold, low-pressure seat, and bladder seal before handing equipment over the counter.

Scuba Regulators & Primary Delivery Systems

Balanced Diaphragm • Environmentally Sealed • DIN / Yoke

First stages operate between 9.2 and 9.8 bar intermediate pressure. Every regulator assembly includes a primary second stage, an under-chin routed yellow octopus, an analog submersible pressure gauge, and a braided low-pressure inflator hose. Rental systems run $35 per day.

IP Setting 9.5 BAR
Ports 2 HP / 4 LP
Daily Rental $35 / DAY

Buoyancy Compensator Systems & Harness Assemblies

Continuous Webbing Backplates • Weight-Integrated Jackets

We stock modular backplate-and-wing units for horizontal trim alongside structured 1000-denier Cordura jacket BCDs with quick-release weight pockets. Rental units run $30 per day and are sized individually during counter consultation.

  • 30 lb donut wings for single cylinder streamlined stability.
  • Dual zippered cargo pockets and marine-grade 316 stainless D-rings.
  • Crotch strap configuration eliminates tank ride-up during surface swimming.

Anatomical Mask & Fin Custom Fitting Bench

Frameless Silicone • Spring-Strap Jet Fins

A leaking mask or blister-inducing fin pocket ruins a dive within four minutes. Divers sit at our Tampa counter fitting station to test facial silicone seal geometry under negative nasal pressure and verify boot-pocket friction before packing gear.

Instructor assisting a diver with low-volume frameless mask fitting and strap adjustment
Shop fitting counter: Negative seal testing and strap angle verification on North Tampa Street.

Cylinders, Breathing Air & Enriched Nitrox Fills

Catalina AL80 • High-Pressure Steel • Grade E Air

Our fill station delivers multi-stage filtered breathing air at 3000 PSI for aluminium and up to 3442 PSI for high-pressure steel tanks. Standard air fills run $12; Enriched Air Nitrox fills up to 40% oxygen run $18 with diver gas analysis verification.

Air Fill: $12 // Nitrox: $18 // Cylinder Rental: $15 / day Cylinder Specifications

Exposure Protection for Florida Springs & Gulf Thermoclines

3mm Warm-Water • 5mm Freshwater Spring Steamers

Freshwater springs in Central Florida sit at 72°F (22°C) year-round, requiring a 5mm glued-and-blindstitched steamer to prevent thermal drain over hour-long dives. Coastal Gulf surface waters shift drastically across thermoclines at depth. Full wetsuit rentals run $25 per day.

Ultrasonic Degreasing & Oxygen-Clean Servicing Station

Bench Inspection • Hydrocarbon Elimination • UV Verification

We operate an on-site testing bench equipped with an ultrasonic cleaning tank, surgical-grade degreasing solutions, and UV blacklight inspection lamps to guarantee complete elimination of hydrocarbon residues prior to high-pressure oxygen blending.

Oxygen-clean servicing bench with ultrasonic bath and hydrocarbon inspection UV lamp
Service bench: Ultrasonic cleaning bath and UV hydrocarbon inspection array.

Equipment Reservation & Fitting Inquiry

All scuba gear rental tampa quotes are inquiry-only. Submit your sizing, dive dates, and equipment requirements below. We inspect, sanitize, and hold hardware for shop pickup at 803 North Tampa Street.